Question 1

What is a matched diamond pair?

Accepted Answer

Two separately cut natural diamonds selected to appear identical when worn together. Matching covers colour, clarity, millimetre spread, table percentage, crown angle, fluorescence and the finish grades. Two stones sharing the same report specifications are not automatically a match, because spread, fluorescence and bow-tie severity vary within a single grade combination.

Question 2

What does “pair” mean when buying diamonds?

Accepted Answer

In the trade, a pair means two loose stones sold together and selected to match, rather than a finished pair of earrings. Pricing is quoted either per carat or for the pair, and carat total weight refers to both stones combined – a 1 ctw pair is two stones of roughly 0.50 ct each, not two 1 ct stones.

Question 3

How are diamond pairs matched for earrings?

Accepted Answer

A cutter or dealer sorts a parcel and selects candidates that hold tolerance on colour, spread, table percentage, crown angle and fluorescence, then confirms the match visually face-up in more than one light source. Fancy shapes are additionally matched on length-to-width ratio, bow-tie severity and mirror orientation.

Question 4

Why are matched diamond pairs more expensive than single stones?

Accepted Answer

Cutting yield. Two stones that hold tolerance are rarer than either stone individually, and unmatched stones sit in inventory waiting for a partner. That search and carrying cost is the premium. It is minimal below 0.30 ct per stone and rises sharply above 1.00 ct per stone.

Question 5

Do diamond earrings need to match in colour and clarity?

Accepted Answer

Colour should match exactly – one grade of separation becomes visible face-up above roughly 0.50 ct. Clarity can differ by one grade provided both stones are eye clean at normal viewing distance, since clarity is far less perceptible on the ear than colour or cut quality.

Question 6

How do I buy two identical diamonds for studs?

Accepted Answer

Buy them as a pair from a supplier who states a matching tolerance in writing, rather than selecting two stones independently from a search filter. If you do select independently, compare full report data – measurements, table, depth, crown angle, fluorescence, and finish grades – not just the 4Cs summary, and view both stones together before committing.

Question 7

What clarity is best for diamond stud earrings?

Accepted Answer

Eye-clean SI1 to VS2 for most buyers. Earrings are viewed at a distance where higher clarity delivers no visible benefit, so budget is better spent on cut grade and millimetre spread. Verify eye-clean status directly rather than trusting the grade.

Question 8

How much does a 1 carat total weight diamond pair cost?

Accepted Answer

As of August 2026, a 1 ctw pair – two stones of roughly 0.50 ct each – in near-colourless, eye-clean, excellent-cut natural goods generally trades in the [X–Y] range at wholesale, with fancy shapes and stricter tolerances at the upper end. Commercial sizes have corrected significantly since 2024, so current pricing in this bracket is favourable against recent years. Request a live quotation against your specification.

Question 9

How do jewellers match side stones to a centre diamond?

Accepted Answer

The pair is selected against the centre stone first, within one colour grade and with comparable finish and fluorescence. Proportion matters too – side stones should be roughly [15–30%] of the centre's spread depending on design. Supply the centre stone's report number when enquiring so the pair is matched to it, not merely to itself.

Question 10

What is the difference between natural and lab-grown diamond pairs?

Accepted Answer

Origin. Natural diamonds form geologically over billions of years; lab-grown are produced by CVD or HPHT in weeks. They are chemically and optically equivalent and are distinguished by growth features, not appearance. Commercially, they behave very differently – lab-grown wholesale prices fell about 14% in the first quarter of 2026 with no established floor, while natural prices have stabilised within a narrow band. We stock natural goods only.

Question 11

How can I check if a diamond pair is well matched?

Accepted Answer

Compare both reports line by line on colour, clarity, measurements, table percentage, depth percentage, crown angle, fluorescence and the three finish grades. Then view the stones face-up together in daylight and warm indoor light, and under UV if fluorescence differs at all. Request a written match sheet stating measured variance on each parameter.

Question 12

Where can I buy certified natural diamond pairs wholesale?

Accepted Answer

From a dealer who holds pair inventory rather than assembling pairs on request from a virtual list, since assembled pairs carry no verified tolerance. Look for published matching standards, both certificates supplied, laser-inscribed report numbers, Kimberley Process compliance, and stated trade credentials. We supply wholesale natural diamond pairs from New York with export to Australia and international markets.

3.57 CT Brownish VVS2 Marquise Lab Diamond Fancy Shape

Description

Built on Trust. Driven by Protection

Related Product

2.01CT F VS1 Marquise Premium Lab Grown Fancy Shape Diamond 15.555.763.99MM

2.58CT F VS1 Marquise Lab Grown Fancy Shape Diamond 15.417.274.14MM

1.55CT E VS2 Marquise Lab Grown Fancy Shape Diamond 12.575.983.69MM

2.02CT E VS2 Marquise Lab Grown Fancy Shape Diamond 12.86.654.15MM

18PT E/F/G VVS/VS Marquise Lab Grown Diamond Layout 631.9MM

Request for price

How can we assist you?

3.57 CT Brownish VVS2 Marquise Lab Diamond Fancy Shape

Description

Built on Trust. Driven by Protection

Related Product

2.01CT F VS1 Marquise Premium Lab Grown Fancy Shape Diamond 15.55*5.76*3.99MM

2.58CT F VS1 Marquise Lab Grown Fancy Shape Diamond 15.41*7.27*4.14MM

1.55CT E VS2 Marquise Lab Grown Fancy Shape Diamond 12.57*5.98*3.69MM

2.02CT E VS2 Marquise Lab Grown Fancy Shape Diamond 12.8*6.65*4.15MM

18PT E/F/G VVS/VS Marquise Lab Grown Diamond Layout 6*3*1.9MM

2.01CT F VS1 Marquise Premium Lab Grown Fancy Shape Diamond 15.555.763.99MM

2.58CT F VS1 Marquise Lab Grown Fancy Shape Diamond 15.417.274.14MM

1.55CT E VS2 Marquise Lab Grown Fancy Shape Diamond 12.575.983.69MM

2.02CT E VS2 Marquise Lab Grown Fancy Shape Diamond 12.86.654.15MM

18PT E/F/G VVS/VS Marquise Lab Grown Diamond Layout 631.9MM